Product ID:50221 MULTI-PURPOSE GREASE & WHEEL BEARING LUBRICANT 10/140Z
MSDS Date:08/14/1995
FSC:9150
NIIN:00F013715
MSDS Number: CFBLL

QUAKER STATE CORPORATION

225 EAST JOHN CARPENTER FREEWAY
IRVING, TX 75062-5000
US

Emergency Phone: 800-562-5928

Info Phone: 214-868-0416

Cage: DO899

QUAKER STATE OIL REFINING CORPORATION

OIL CITY, PA 16301 US

Telephone: 814-676-7676

Cage: DO899

OIL PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY PARAFFINIC

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 20-30%

LITHIUM, 12-HYDROXYOCTADECANOATE SEBECATE COMPLEXES

CAS: 68815-49-6

Fraction By Weight: 5-9%

PETROLEUM HYDROCARBONS, SOLVENT DEWAXED RESIDUAL OIL

CAS: 64742-62-7

Fraction By Weight: 30-35%

DIALKYL (ALKYL) DITHIOPHOSPHORIC ACID, ZINC SALT

CAS: 68649-42-3

Fraction By Weight: 0-2%

LIGHT NAPHTHALIC DISTILLATE, HYDROTREATED LIGHT NAPHTHENIC

CAS: 64742-53-6

RTECS: PY8036000

Fraction By Weight: 30-35%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: PRODUCT MAY BE IRRITATING.
PRODUCT IS HARMFUL IF SWALLOWED. THIS PRODUCT MAY BE HARMFUL BY
INHALATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DRYING/DEFATTING OF SKIN.

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN: WASH W/MILD
SOAP & WATER. INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE
TO FRESH AIR. GIVE CPR/OXYGEN IF NECESSARY. OBTAIN MEDICAL
ATTENTION IN ALL CASES. NOTE TO PHYSICIAN: HIGH PRESSURE SKIN
INJECTION: PHYSICIAN MUST BE FAMILIAR W/TREATMENT OF THIS TYPE OF
WOUND; INCISION, IRRIGATION, REMOVAL OF ALL NECROTIC TISSUE/OPEN
WOUND DRESSING.

Flash Point Method:COC
Flash Point:475F
Extinguishing Media:DRY CHEMICAL, CO2, EARTH, SAND
Fire Fighting Procedures:WEAR FULL SET OF PROTECTIVE EQUIPMENT
INCLUDING CHEMICAL GOGGLES & GLOVES. WATER/FOAM MAY CAUSE FROTHING,
WHICH CAN BE VIOLENT.
Unusual Fire/Explosion Hazard:EMPTY CONTAINERS RETAIN PRODUCT RESIDUE.
DON'T CUT/WELD/SOLDER/DRILL/GRIND/EXPOSE CONTAINERS TO
HEAT/FLAME/SPARKS/OTHER IGNITION SOURCES. (SEE SUPP)

Spill Release Procedures:ISOLATE & EVACUATE AREA. ELIMINATE ALL
IGNITION SOURCES. AVOID EXCESSIVE SKIN CONTACT. WEAR PROTECTIVE
EQUIPMENT & CLOTHING DURING CLEAN-UP. ABSORB W/INERT
ABSORBENT/RECOVER USING PUMPS. SCOOP UP USED ABSORBENT INTO DRUMS.
(SEE SUPP)

Handling and Storage Precautions:STORE AWAY FROM STRONG OXIDIZERS &
SOURCES OF IGNITION. KEEP CONTAINER TIGHTLY CLOSED & IN A
WELL-VENTILATED PLACE. USE W/ADEQUATE VENTILATION.
Other Precautions:DON'T STORE IN OPEN/UNLABELED CONTAINERS. KEEP
MATERIAL AWAY FROM FOOD/DRINK & ANIMAL FEED. AVOID INHALATION &
SKIN CONTACT WHEN HANDLING USED OIL. EMPTY DRUMS SHOULD BE
COMPLETELY DRAINED, PROPERLY B UNGED & RETURNED TO A DRUM
RECONDITIONER

Respiratory Protection:IF MIST IS GENERATED (HEATING/SPRAYING) &
ENGINEERING CONTROLS AREN'T SUFFICIENT, WEAR APPROVED ORGANIC VAPOR
RESPIRATOR SUITABLE FOR OIL MIST.
Ventilation:USE IN A WELL-VENTILATED AREA.
Protective Gloves:IMPERVIOUS/NEOPRENE/POLYVINYL CHLORINE
Eye Protection:FULL FACE SHIELD
Other Protective Equipment:OIL-IMPERVIOUS GARMENTS, BUTYL
RUBBER/POLYETHYLENE GLOVES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WHEN USING THIS MATERIAL, EAT, DRINK/SMOKE.
Supplemental Safety and Health
FIRE HAZ CONT'D: PRODUCT IS COMBUSTIBLE AT TMEPS >475F. AUTOIGNITION
TEMP: >600F. SPILL PROC CONT'D: SURFACES MAY BE SLIPPERY AFTER
SPILLAGE.

Boiling Pt:B.P. Text:500F
Melt/Freeze Pt:M.P/F.P Text:500F
Spec Gravity:0.86
Solubility in Water:<0.1
Appearance and Odor:LIGHT AMBER LIQUID W/BLAND ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS; PEROXIDES, CHLORINE, STRONG ACIDS
Stability Condition to Avoid:EXCESSIVE HEAT, OPEN FLAME, FLARES,
ELECTRICAL SPARKS & OTHER IGNITION SOURCES
Hazardous Decomposition Products:THERMAL DECOMPOSITON: CO, CO2

Waste Disposal Methods:USED OIL CAN BE RETURNED TO A COLLECTION
CENTER/PROVIDED TO A LICENSED RECYCLER. ALL WASTES MUST BE
HANDLED/DISPOSED OF IAW/LOCAL, STATE & FEDERAL REGULATIONS. DON'T
ALLOW MATERIAL TO DRAIN TO SEWERS/ WATER SUPPLIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.